Upper of: 40.0% Polyester, 40.0% Leather - Bovine - Split, 20.0% Polyamide ; Lining and sock of: 100.0% Polyester ; Outer sole of: 60.0% Synthetic Rubber, 40.0% Ethylene Vinyl Acetate

We have classified our products in terms of performance and features for 3 levels of Mountain Walking:- occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 6 miles and less than 2,000 feet of elevation gain.- Regular: about 20 outings per year. 4 to 6 hours, 6 to 12 miles, 2,000 to 4,000 feet of elevation gain per outing.- Intensive: more than 20 times a year. More than 6 hours, more than 12 miles, 4,000 to 6,500 feet of elevation gain per outing.

New high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more resistant. The sole is designed for better grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions.

In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry.Then we confirm in the field or under the rain, that the shoe meets its promises.

To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.We advise re-waterproofing your boots twice a year using a re-waterproofing agent which will help you restore the original water-repellent qualities and help prevent stains on the outside.

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.

Some Decathlon stores have a test route.1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.3. Check two points:- the heel does not come up before the boot when you walk uphill.- the foot does not slide and the toes do not press against the front when going downhill.4. Try on several sizes and models.Break them in gradually to adapt them to your foot.

Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a shoe in your size.- Wear suitable socks- Tie and tighten your shoes properly.- Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent.- Wear your shoes on a short trip for the first use.

A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the MH500, MH520 and MH900 are therefore preferable for absorbing perspiration and reducing overheating.

The original insole in your boots is designed to accommodate most feet. A change of insole can bring:1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes.Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.

Store in a well-ventilated dark, dry place.

Imported